Page 38 - WIFA roller skates catalog 2023-24
P. 38
ACCESSORIES
BALL BEARINGS
SET (16 units) 7 MM
SET (16 units) 8 MM
AXLE SLEEVES
conversion of 7 mm axle to 8mm
With axle sleeves you can easily convert the 7mm axles to 8mm and use all
your wheels that have 8mm bearings including LED wheels. Axle sleeves are
especially important if you have European plates and want to use LED wheels!
These only work with axle sleeves!
MOUNTING RECOMMENDATIONS
If you order our mounting service we will mount according to our
recommendations. We mount slightly „off center“ as recommended by most
specialized shops and top skaters.
placement of the plates and plate size
the placement is: heel as flush as possible, plates indented at the front.
short plate: space at front for dancers approx. 7-15 mm - for more agility
longest plate: lowest possible at front - for more stability
For STD plates, sizes 11, 12, 13, our standard mounting is lowest possible space
at front to allow using one plate for 2 boot sizes if it is a child still growing.
If you want the mounting to be different to our recommendations, please
advise.
How to mount the plate:
heel: 2 pull-through screws, 2 long screws (length 25 mm)
front part of boots: 2 pull-through screws (20mm) + 2 screws (16 mm)
CAUTION! In the inner boots - at the heel - screws are placed from the inside
to the outside. These are very important for the stability of the heel to the
shaft and must not be removed! If they are in the way when mounting a frame,
please move them to another part and screw them in again.
38