Page 37 - WIFA roller skates catalog 2025-26

WIFA ACC E S S O RIE S

BALL BEARINGS

SET (16 units) 7 MM

SET (16 units) 8 MM

AXLE SLEEVES

conversion of 7 mm axle to 8mm

With axle sleeves you can easily convert the 7mm axles to 8mm and use all your wheels
that have 8mm bearings including LED wheels. Axle sleeves are especially important if you
have European plates and want to use LED wheels! These only work with axle sleeves!

MOUNTING RECOMMENDATIONS

If you order our mounting service we will mount according to our recommendations. We
mount slightly „off center“ as recommended by most specialized shops and top skaters.

placement of the plates and plate size
the placement is: heel as flush as possible, plates indented at the front.

short plate: space at front for dancers approx. 7-15 mm - for more agility
longest plate: lowest possible at front - for more stability

For STD plates, sizes 11, 12, 13, our standard mounting is lowest possible space at front to
allow using one plate for 2 boot sizes if it is a child still growing.

If you want the mounting to be different to our recommendations, please advise.

How to mount the plate:
heel: 2 pull-through screws, 2 long screws (length 25 mm)
front part of boots: 2 pull-through screws (20mm) + 2 screws (16 mm)

CAUTION! In the inner boots - at the heel - screws are placed from the inside to the
outside. These are very important for the stability of the heel to the shaft and must not be
removed! If they are in the way when mounting a frame, please move them to another part
and screw them in again.

37